Products

Matte Panel PET Graphic Overplay for Calibrator

Brand:FLEXKYS
Material: PET/PC/PVC
Size:Customized Size Accepted
Certification:ISO9001:2008 /ROHS/SGS
Payment terms:T/T,West Union,Paypal
Shipping by: UPS/ Fedex /DHL /TNT or Other Ways Specified
Delivery time: 12~15 Working Days
INQUIRY
Description
►Product name: Matte Panel PET Graphic Overplay for Calibrator


►Specification
Graphic overlay: Autotex F200 Matt
Rear adhesive: 3M468
Cutout



►Description
It is used on low voltage calibrator. It requires strong adhesive to attach on ABS surface.


Common materials
The most widely used materials are polycarbonate and polyester.
Polyester(PET) :
Highly versatile for embossing
Highly resistant to chemicals
Better durability
For internal and external use
Polycarbonate(PC) :
Wide range of surface finishes and thicknesses
More cost-effective
For internal and external use
The material loses its chemical resistance if embossed.


 
Common finishes
Gloss :
It Is very similar to glass
Easy to clean
Allows for the use of clear windows
Textured :
Print and scratch resistant
Available in different glosses, from semi-gloss to matte
Available in a variety of finishes (suede, velvet, brushed, etc.)


Notes
We accept artwork drawing in .ai, or PDF.
Please provide Pantone number if you have high requirement on color.
Its free to change the printing for mass production.


 
Printing Film Surface Thickness Peculiarity
PET
Glossy(Normal,Hard coat) 0.125/0.180mm
•hard texture
•suitable for making poly dome
•high corrosion resistance
Matt (Fine texture,Velvet) 0.150/0.200mm •soft texture
•good fire resistance
•low corrosion resistance
PC Glossy(Normal,Hard coat) 0.175/0.250/0.350/0.500/1.00mm
Matt (Fine texture,Velvet) 0.175/0.250/0.370/0.500
Optional Rear adhesive:3M 467,3M 468,3M 200 MP,3M 300LSE,3M 9080A,3M55280

►Common Materials

►Panel Mount Guidance
Clean up the surface where the switch is bonded and make sure it is flat ,without rust, oil and dust.
Compare the panel size with the paste area and confirm the direction.
Tear off a corner of the bottom release paper and locate the correct position, then slowly remove the rest release paper and flatten the panel.
If you fail to mount the panel in one time, tear off  the panel and remount it. Please change another panel if the back adhesive is broken and clear up the paste area.


►We can offer special 3D texture pannel as followed

 
Review


1/3
X