Graphic Overlay for Line Transmitter

Material: PET/PC/PVC
Size:Customized Size Accepted
Certification:ISO9001:2008 /ROHS/SGS
Payment Terms:T/T,West Union,Paypal
Shipping by: UPS/ Fedex /DHL /TNT or Other Ways Specified
Delivery Time: 12~15 Working Days
►Product name: Graphic Overlay for Line Transmitter

►Keyword:graphic overlay,graphic overlay for line transmittter,lexan label sticker

Main Material:a.Graphic overlay-Matt PET 0.125mm; 
                                   b.Rear adhesive-3M 468

Embossing Style: pillow emboss
Total thickness: 3mm
Using environment: outdoor
Working temperature:-20~60℃
mounting temperature:15~30℃

The above product information is for reference only, we can provide customized production according to the design requirements of customers.
 Optional material for panel: (1)PET (2)PC (3)PMMA ,thickness from 0.13~2.0mm

Printing Film Surface Thickness Peculiarity
Glossy(Normal,Hard coat) 0.125/0.180mm
•hard texture
•suitable for making poly dome
•high corrosion resistance
Matt (Fine texture,Velvet) 0.150/0.200mm •soft texture
•good fire resistance
•low corrosion resistance
PC Glossy(Normal,Hard coat) 0.175/0.250/0.350/0.500/1.00mm
Matt (Fine texture,Velvet) 0.175/0.250/0.370/0.500
Optional Rear adhesive:3M 467,3M 468,3M 200 MP,3M 300LSE,3M 9080A,3M55280

►Common Materials

►Panel Mount Guidance
Clean up the surface where the switch is bonded and make sure it is flat ,without rust, oil and dust.
Compare the panel size with the paste area and confirm the direction.
Tear off a corner of the bottom release paper and locate the correct position, then slowly remove the rest release paper and flatten the panel.
If you fail to mount the panel in one time, tear off  the panel and remount it. Please change another panel if the back adhesive is broken and clear up the paste area.

►We can offer special 3D texture pannel as followed